Best Gain

 

 

Performance and features:

Odor Remover is a kind of deodorant by method of absorption and reaction and also has a good dispersion. Compared with other methods of deodorant, it can completely eliminate the odor of paint and PP, PE, PVC, ABS, PS plastic, rubber , rather

than using other scents to cover. It has strong absorption of CO2, SO2, nitrogen oxide exhaust gas (NOX), ammonia (NH3)

pesticide bottles, cosmetic bottles, beverage bottles, chemical additives, residues scents, but the original smell of plastic,

rubber, paint, ink, paint will not change. All types of following have no smell with non-toxic and non-stimulation which has

passed SGS Certification.

Following is the detailed introduction of each type:


BT-100A:
It is made of mineral substance with the main method of absorption. It is general type for normal use in the plastic with less

odor.
Application: it can be used in PP, PE, HDPE, PVC, PS, PA, ABS, EVA, shoes material, rubber, paint, ink, paint etc.
Dosage: 0.1%-0.3% for plastic, 0.8%-1% for rubber material.
Apperance: white powder.

BT-716:
It has the same function as BT-100A , but the dosage is less.
Dosage: 0.05%-0.1% for plastic.
Apperance: white powder.

BT-854:
It has the same function as BT-100A for removing strong odor.
Application: it is also better for soft PVC application.
Dosage: 0.1%-0.2%, usually only add 0.1% us enough.
Apperance: white powder.

 

BT-793:
It is adopt high technology of root meridian extraction with better method of decompose.
Application: it is better used in PP, PE and soft PVC.
Dosage: 0.1%-0.2%.
Apperance: white powder.

BT-583:
It is mainly for foaming processing of recycle plastic.
Application: it can be used in the foaming of PP, PE, PVC, PS, ABS, EVA and rubber.
Dosage: 2%-4%.
Apperance: white powder.

BT-267:
It is mainly used for shoes production.
Application: it can be used in PP, PVC, PS, ABS and PC etc.
Dosage: 0.05%-0.2%.
Apperance: white powder.

 
BT-120:
It is usually used in rubber material.
Application: PP, PE, PVC, PS, PA, ABS and shoes material.
Dosage: 0.1%-0.5%.
Apperance: white powder.

BT-130
It can eliminate the odor coming from the plastic with filler of French white and calcium carbonate.
Application: PP, PE, PVC, ABS, PS and rubber.
Dosage: 0.4%
Apperance: white powder.

Packaging and storage:
Odor remover is powder form and 15KG are packed in one carton with aluminum packaging inside. It should be stored

in a clean, ventilated, dry place with storage period of 12 months.

Note:
1.The buyers should choose the type according the odor size of the material.
2.We can eliminate the other odor which not mention in this catalogue, if you can not judge what is the odor , you just

send some small sample to us, we can make test in our lab and help you to make decision that which type can be used.
3.When application, uniform mixing should be done with plastic and make processing after 5 minutes.
4.The smell will gradually eliminated when the product getting cool after adding the deodorant.
5.If the deodorant are added too much, the product will be affected to yellowing.

As the chemical odor is very difficult to judge where it comes from, so we kindly request to send the sample to us

for lab test, so that we can make the right type for your application.

 

 

 
在线客服
在线客服系统
在线客服
在线客服系统